Seeing standing water in your basement probably makes your stomach turn, especially if you have dealt with this kind of situation before. Water can quickly damage your things and cause mold growth. In addition, removing it is not a picnic. If you are looking for the best way to properly drain your flooded basement, you are in the right place. In this post, we will address this problem and also discuss some waterproofing measures that will ensure that you don’t have to deal with this situation ever again.
Safely Dry Out the Area
If the water has risen above electrical outlets, an electrical current is likely running through the water. Stepping into it could hurt or even kill you. Therefore, before you step into the water, make sure to turn the power off. If the switch is located on the other end of the basement and you would have to step into the water to approach it, call basement flooding repair specialists and let them handle things.
Once you have turned the power off or made sure in any other way that there is no electrical current running through the water, you can start drying out the basement. A lot of homeowners use a wet vacuum to collect water. However, you can also use a pool pump for this purpose. In case you don’t have any of these tools, you can always use a bucket and mop. When all of the water is gone, you will need to thoroughly dry out the basement. The best way to do this is to turn on a dehumidifier. This step is incredibly important since it will help you prevent mold growth and rot.
Causes of Flooding
Sometimes, it is very easy to determine why your basement ended up flooded, while other times the cause of the flooding is a mystery. Here are some of the most common causes of such issues.
Rainfall or snowmelt – Every time it rains in Denver, CO, rainwater saturates the soil around your basement and accumulates under your foundation. Due to increased hydrostatic pressure, water infiltrates the walls and the floor and enters your basement.
Issues with the sewer system – Do you live in an old home? In the past, sewer pipes were made of cast iron. This is a problem since this material deteriorates and rusts over time. If you have old sewer pipes in your home, they may have started to leak. Also, these pipes can get damaged by tree roots or clogged. Any of these problems with the sewer pipes can cause flooding issues.
Negative grade – When the ground surface in your yard slopes toward your home, you have a problem. That means that every time it rains, all the runoffs will flow toward your home and pool around its perimeter, slowly saturating the soil.
Foundation cracks – Cracks in the foundation walls or floor can let water into your basement. From time to time inspect your basement for cracks and gaps in the walls. If you notice them, call your local contractor, as cracks can often be a sign of foundation settlement.
Basement leaks – If your water heater starts to leak, it can quickly cover your basement floor with water. Therefore, make sure all of your appliances are in good condition.
Preventing Future Problems
Regardless of whether or not your basement has ever been flooded before, you should consider waterproofing your home. Here are some measures that can help keep your basement dry and safe from water damage.
Install an interior drainage system – Water that comes in through the wall can slowly build up in your basement and cause damage. An interior drainage system will collect this water and send it to your sump pit before it causes any problems.
Install a sump pump system – A sump pit is created in the floor and its purpose is to collect water that accumulates beneath your home during heavy rains, snow blizzards, or snowmelt. A sump pump located in the pit is in charge of pumping out the excess water and directing it away from your property.
Maintain your gutters – Gutters may not be flashy, but they are still an important part of your waterproofing system. Making sure they are clean and free of cracks can help prevent flooding issues. If you notice that they are damaged, replace them with new ones as soon as possible.
Repair the cracks – If there are cracks in your basement walls or floor, you need to repair them. However, make sure that a contractor takes a look at them before you take any action so that they can determine what caused them.
Install downspout extensions – These fixtures are simple, yet quite handy since they direct water further from your home.
If you wish to waterproof your basement, contact your local experts at Complete Basement Systems and schedule a free inspection.