Dehumidifiers are among the most common waterproofing measures. They’re easy to install and can pull unwanted moisture from the air in your home. If you want your dehumidifier to continue working as it should, however, you’ll need to take steps to maintain it.
Below are various things you need to think about when installing and upkeeping your dehumidifier
Location, Location, Location
Did you know that the location of your dehumidifier can impact its functionality? Naturally, you’ll want your dehumidifier to reside near the source of moisture in your home. However, if you place your dehumidifier poorly, you could do more harm than good. A dehumidifier that’s been misplaced can fall victim to environmental obstacles. It can also take on more condensation than it’s meant to and start to overwork itself.
When in doubt, it’s best to scout out your location for the best place to put your dehumidifier. Ideally, you’ll want to place it away from low-grade areas but close enough to the source of moisture that it has a direct line of airflow. If you’re not sure which parts of your basement may be more secure than others, you can always talk to one of the professionals working out of the Colorado Springs, CO, area about a home inspection.
Think About Bucket-Emptying
While dehumidifiers are powerful waterproofing measures, some do require a human touch. If you have a conventional dehumidifier in your home, you’re going to need to empty its buckets or reservoirs every other day if you want to keep it from spilling over. Alternatively, some dehumidifiers shut down when their buckets fill up. If you live in a high-moisture area, you’re going to need your dehumidifier going as often as possible. Set up a care schedule and use the water you collect indoors to water your plants or care for your lawn. Once you get into a habit, it’ll be significantly easier for you to ensure that your dehumidifier continues to work.
However, some professional basement contractors – like Complete Basement Systems, for example – offer self-draining dehumidifier models perfect for crawl spaces and basements. These models are powerful, yet energy-efficient, and they have the ability to drain water collected from your basement or crawl space air into an interior drainage system or sump pump. That way, you don’t have to worry about emptying any buckets.
Clean Your Dehumidifier
It takes more than emptying your bucket consistently to keep your dehumidifier clean, though. You’ll need to clean your dehumidifier at least once a month to ensure air and moisture continue to flow through it.
Dehumidifiers can rapidly become incubators for mold if they’re not regularly cleaned. With this in mind, remove your dehumidifier’s bucket, if it has one, and clean all accessible parts with warm water and soap. You can alternatively use a gentle chemical cleaner to kill off any mold particles that may have started to take root. Finally, be sure to use a vacuum to clear out the vents and grills.
Check Your Humidistat
You never want to overwork your dehumidifier. That’s why it’s important to check your humidistat frequently. Your humidistat indicates how much moisture your dehumidifier should be pulling out of the air. If you consistently run your dehumidifier at full throttle, you’ll risk overworking it and damaging some of its internal parts beyond repair.
You’ll want to cycle your humidistat so that your dehumidifier can get the breaks it needs to continue functioning appropriately.
Inspect Your Filters
Your dehumidifier uses filters to clear the moisture and other particles out of the air. Naturally, you’re going to need to clean these filters if you want the air in your home to remain as healthy as possible. You can do this by taking a vacuum to the filters after you’ve removed them from your dehumidifier. Alternatively, if your filters have collected an overwhelming amount of debris, you may need to replace them outright.
Look at Your Coils
The coils in your dehumidifier are especially sensitive. You’ll need to take steps to ensure that the water your dehumidifier takes in doesn’t freeze around these coils. Ideally, keep your dehumidifier in a space that is at least 60°F. You’ll also want to keep your dehumidifier out of the lower-grade parts of your basement so as to prevent standing water from reaching the coils.
Reach Out to A Professional
If you’ve done everything you can to ensure that your dehumidifier’s well-maintained but it’s still not pulling as much moisture out of the air as you’d like, don’t panic. You can always get in touch with an industry professional to try and determine what may have gone wrong. You may be able to invoke a dehumidifier’s warranty, if applicable, and get a replacement part or machine free of charge.
Alternatively, a professional inspection may determine that there is more extensive damage to your foundation or basement. In these cases, let basement and foundation repair professionals inspect your home for you. You’ll benefit from a free quote on potential services and, if applicable, a reinvigorated dehumidifier.